What’s DPC (Direct Plated Copper)?

DPC (Direct Plated Copper) involves physical vapor deposition (PVD) method-Sputtering under high temperature and pressure conditions to plate the copper to substrates.

DPC Process in Ceramic PCB Manufacturing

Ceramic Substrate—Laser Drilling—Sputtering—Dry Film—Exposure—Development—Copper Plating—Ni Plating—Gold Plating/Immersion Gold—Stripping—Etching

The entire DPC process basically comprises the 10 steps with details as following:

Ceramic Substrate: There are aluminum nitride (AlN) and alumina (Al2O3) bare ceramic substrates without copper clad for choose in ceramic printed circuit board (PCB) manufacturing. We use laser to cut the ceramic substrate to the pieces board size or array size in substrate cutting step. Customers may haven’t laser machine to depaneling, so, our delivery format of ceramic PCBs are unit (single pieces) but not array (/set).

Laser Drilling: As ceramic is fragile, holes drilling cannot be realized with mechanical NC drilling, but laser. If your board has plated through holes (PTHs), we need drilling holes through the substrate by laser. These holes can be used as via holes to communicate between both sides of the ceramic substrate if it is necessary for some specific designed board layout. NPTH drilling is also with a laser.

Sputtering: With the sputter deposition technique, vacuum sputtering under high temperature and pressure conditions to plate the copper to the opposite sides of the bare substrate so that it is covered with a copper layer on both sides. The addition of a thin film titanium (Ti) layer acts as a bonding interface between the copper and ceramic layers. During this part of the process, a very thin copper film (generally 1μm in thickness) is deposited coating the ceramic substrate and it is also deposited in any pre-drilled holes. After sputtering process, it forms a ceramic-based copper clad laminate (CCL), i.e. DPC copper-metallized substrate.

Dry Film: Apply dry film onto the thin copper film on both sides of the copper plated ceramic substrate.

Exposure: A film (different from thin or thick film, but like a photo film) is made using conventional photomask technology. The photomask is flatly positioned and adheres to the dry film on the ceramic substrate, which is sent into an exposing chamber. After creating a vacuum in the exposing chamber, UV lights irradiate the dry film through the photomask, which is polymerized by the ultraviolet radiation. The dry film, which is not irradiated by the UV rays, does not react and keeps its chemical composition.

Development: The development process etches the polymerized part of the dry film by chemical cleaning or physical cleaning. In this way, some parts of the copper film are exposed from the dry film; those parts of the copper film will form the required circuit patterns as per the Gerber artwork of the ceramic board, in order to produce the required copper areas of a circuit board on the ceramic substrate. Thus, the copper features, like patterns, annular rings and others, can be printed on the dry film.

Copper Plating: Plating copper leads first. Then copper is deposited to fill the exposed parts of the dry film on the ceramic substrate, with suitable conductor thickness and width, by a plating technology to form the copper features. By the above processes, the metallized circuit area has slender, flat and smooth characteristics, and the heat dissipation is good. When plated copper thickness is thicker than the desired, we need to grind the extra copper off with a high-end ceramic grinding machine (same as that used in Via-in-Pad process), which has 1μm high precision per grinding cycle.

Ni Plating: The nickel layer prevents the atoms of the copper leads diffusing into the gold layer in afterwards gold plating or immersion gold.

Gold Plating or Immersion Gold: Nickel and gold are deposited on the upper surface of the copper. The gold layer avoids the oxidization of the conductor surface and improves the adhesion for the gold bonding wires. An optical resistance is formed on the upper surface of the copper.

Stripping: The remaining dry on the ceramic substrate is then removed. After stripping the dry film, the copper circuit is protected by the nickel and gold layers.

Etching: etching the seed metal copper.

Key Attributes of DPC

Due to the DPC processes described and the materials used, several key attributes of the DPC process can be summarized as below:

·Superior CTE and high thermal conductivity

·Low electrical resistance conductor traces

·Stable up to temperature > 340°C

·Accurate feature location, compatible with automated, large format assembly

·Fine line resolution allowing high density of devices and circuitry

·Proven reliability

·Mechanically rugged ceramic construction

·Low cost, high performance ceramic solution

Applications of DPC Metallized Substrate

Based on ceramic and thick copper construction, the DPC substrate provides outstanding thermal and electrical performance for applications in high power or high current devices. In PCB manufacturing industry, DPC technology is applicable for most of thin film Ceramic PCBs fabrication.

The applications of DPC metallized substrate can be selected on high-brightness LED (HBLED), substrates for solar concentrator cells, power semiconductor packaging and automotive motor control. In addition, DPC substrates with excellent electrical performance can be considered for RF/microwave components, which require very low loss. These DPC substrates can therefore be widely used for high frequency components that require high power and high heat.

As leading manufacturer of Ceramic PCB in China, Hitech Circuits has more than 10 years experiences of Ceramic PCB manufacturing. If you are looking for a dependable ceramic PCB, Hitech can be your best choice. Please email sales3@hitechcircuit.com for a quote. If you want to know more about our products, please visit https://hitechcircuits.com/